Smart EV Charger JNT EVC10
Modern design, functionality and ease of use.
The JNT EVC10 electric vehicle charger can be used both indoors and outdoors. Dedicated to people who appreciate not only high quality but also modern and unique design combined with functionality and trouble-free operation. The charger is equipped with a charging cable terminated with the most popular type 2 connector among electric vehicles.
4,3" LCD screen.
Monitor charging status - including current, voltage and run time.
High-quality material + anti UV coating.
Cable 5m + Type 2 connector
The long cable ensures that the charger can be easily connected to the car.
Commercial use possible, e.g. in hotels, car parks etc.
JNT-EVC10 EV Charger feaures:
- Mode-3 operation.
- Regulated charging current.
- High resistance.
- Lightweight and durable design.
- Easy to install.
- Intuitive operation.
- RFID identification system.
- OCCP 1.6J communication.
- Dedicated mobile application.
Possible installation locations:
PRIVATE ESTATES I GARAGES I SERVICE WORKSHOPS I PETROL STATIONS I CAR SHOWROOMS I SHOPPING CENTRES I COMPANIES I HOTELS I RESTAURANTS I CAR PARKS
The JNT EVC10 charger is available in four variants:
|EVC10-AC03/02C||230V - 3,6kW (1-phase)||check|
|EVC10-AC07/02C||230V - 7kW (1-phase)||check|
|EVC10-AC11/02C||400V - 11kW (3-phase)||check|
|EVC10-AC22/02C||400V - 22kW (3-phase)||check|
|Wattage||3,6kW / 7kW/ 11kW/ 22kW|
|User interface||RFID (ISO 14443)|
|Operating temperature||from -30° to +50°C|
|Humidity||max. 95% RH|
|Protection degree||IP65 / IK08|
|Net/gross weight||5,0 - 6,1kg / 6,5 - 7,6kg|
|Charging connector||charging cable - length 5m|
|Installation||wall-mounted or on a dedicated stand (optional accessory)|
|Safety||RCD: TypA + DC6mA;
Types of protection: residual current protection, over-voltage protection, under-voltage protection, overcurrent protection, overheating protection, short-circuit protection.
For more information visit our website dedicated to EV chargers: